"Kanto" Water Quality analysis

รายละเอียด

สินค้าสารเคมี (Reagents) และสารมาตรฐาน (standard) จาก Kanto Chemical ประเทศญี่ปุ่น สารเคมีที่มีความบริสุทธิ์สูง สำหรับใช้ในงานทดสอบและวิเคราะห์คุณภาพน้ำ (Water quality test) ตามมาตรฐานวิเคราะห์สากล ประกอบด้วยสินค้าประเภทต่าง ๆ ตามการใช้งาน ดังนี้

  • Reagent for pH measurement​
  • Reagent for turbidity measurement
  • Reagent for chromaticity measurement
  • Regent for BOD / COD measurement
  • Reagent for ion chromatography
  • Standard solution for analysis of metals​
  • Indicator

ข้อมูลสินค้า :

สารเคมีสำหรับการวัด pH (Reagent for pH measurement​)
รายการสินค้า
   - Carbonate pH standard solution pH 10.01
   - Oxalate pH standard solution pH 1.68
   - Neutral phosphate pH standard solution pH 6.86
   - Phosphate pH standard solution pH 7.41
   - Phthalate pH standard solution pH 4.01
   - Borate salt pH standard solution pH 9.18

สารเคมีสำหรับการวัดความขุ่น (Reagent for turbidity measurement)
Traditionally, kaolin standard solution has been used for turbidity measurement for low range turbidity
such as 0.1 degree is required as part of countermeasures against pathogenic microorganisms such as cryptosporidium etc. According to the tap water quality standards, polystyrene particle suspension is adopted as a turbidity standard solution which can measure up to low turbidity range and less variation from lot to lot than kaolin. Measurement is adopted as a standard turbidity column for instrument calibration and transparency turbidimetry, transmission light measurement method, scattering light measurement method, integrating sphere hotoelectricity method, particle number measurement method are adopted.
รายการสินค้า :
   - Turbidity standard solution
   - Formazin standard solution

สารเคมีสำหรับการวัดสี (Reagent for chromaticity measurement)
It is prepared by dissolving potassium chloroplatinate and cobalt chloride in hydrochloric acid. This stock solution is serially diluted to prepare a standard chromaticity column and tested by colorimetric method, transmitted light measurement method.
รายการสินค้า :
   - Color standard solution

สารเคมีสำหรับงานวิเคราะห์ค่าบีโอดี/ซีโอดี (Reagent for BOD / COD measurement)

COD measurement

Reagents used for measurement of chemical oxygen demand (CODMn) by potassium permanganate (KMnO 4).
COD measurement in general are methods to analyze under various conditions depending on the liquidity of the sample, the type of oxidizing agent, heating method, heating time, etc. The COD value is determined by consumption of oxidizing agent, and domestic measurement by KMnO 4.
รายการสินค้า

   - Potassium permanganate solution 0.005 mol/l

   - Silver nitrate solution 200 g/l

   - Sodium oxalate solution 0.0125 mol/l

   - Sulfuric acid

BOD measurement

BOD seed was born and gathered about 30 years of know-how of bacteria production by Novozymes Biologics, which is trustworthy as a top manufacturer of bacteria. 

BOD seed is a blended inoculum preparation so that it can obtain BOD value equivalent to that of bacteria prepared from sewage sludge, bacteria having resolution to various organic substances. The formulated bacteria are produced and compounded under strict product control and lot management after isolation and cultivation, respectively. In particular, in order to reduce variations in bacteria blending ratio and substrate decomposition performance among lots, we have made maximum management at the production factory that acquired ISO 9000. We make it easy for everyone to prepare for BOD measurement and provide more accurate measurement results.  

รายการสินค้า :
   - CHEMTM BOD seed
   - Buffer solution (pH 7.2) (Solution A for BOD measurement)
   - Magnesium sulfate solution ( B solution for BOD measurement)
   - Calcium chloride solution (solution C for BOD measurement)
   - Iron (III) chloride solution (solution D for BOD measurement)

สารเคมีสำหรับงานวิเคราะห์ด้วยเครื่องไอออนโครมาโตกราฟี (Reagent for ion chromatography)

รายการสินค้า :

   - Cation mixed standard solution
   - Anion mixed solution
   - Ion standard solution : Bromate, Calcium, Chlorate, Chloride, Chlorite, Cyanide, Fluoride, Magnesium, Nitrate, Sodium

สารมาตรฐานสำหรับการวิเคราะห์โลหะ (Standard solution for analysis of metals)

รายการสินค้า :

   - Metals mixed standard solution 
   - Metal standard liquid : Al, Sb, As, Ba, Bi, Bo, Cd, Ca, Cr, Co, Cu, Ga, In, Fe, Pb, Mg, Mn, Hg, Mo, Ni, Sc, Se, Ag, Na, Tl, Y, Zn

สารอินดิเคเตอร์ (Indicator)

Indicators สำหรับ neutralization titration, precipitation titration, oxidation reduction titration, complexometric titration, etc. ตามมาตรฐาน JIS K 8001.

รายการสินค้า

A : Ammonium iron (III) solution
B : Bromocresol green solution, Bromocresol green-methyl red solution, Bromocresol purple solution, Bromophenol blue solution, Bromothymol blue solution
C : Cresol red solution,
M : Methyl orange solution, Methyl red solution, Methyl red-methylene blue solution
N : 4-Nitrophenol solution
P : Phenolphthalein solution, Phenol red solution T : Thymol blue solution, Thymolphthalein solution
U: Uranine solution

1) Direct link to brochure lists : kanto.co.jp/english/download_reagent.html

2) Direct link to SDS/COA/specification : cica-web.kanto.co.jp/CicaWeb/servlet/wsj.front.LogonSvlt?lang=En&_ga=2.254855496.1187272589.1523927800-1768337672.1476762954

3) Direct link to E-catalog : cica-catalog.kanto.co.jp/english/?_ga=2.31687422.1187272589.1523927800-1768337672.1476762954


ติดต่อสอบถามข้อมูล หรือขอใบเสนอราคา

สันธนะ พงษ์พิทักษ์ / Sales Manager
โทร. 081-8898514
Email : santana@pcc.in.th

คุณอาจจะชอบ

  • "Kanto" Reference Material (CRM)
  • "Kanto" Primepure Solvent
  • "Kanto" Analytical Reagent & Standard
  • "Kanto" Customized Refining Solvent